24
Use cursor keys to select
Start Measurement
.
Confirm by pressing <
ENTER
>.
Sensor placement screen: Mount transducers
with suggested spacing and use middle bar for
fine adjustment of position (central position is
desired). Observe signal-to-noise (upper bar)
and quality (lower bar). These should be of iden-
tical length.
Confirm by pressing <
ENTER
> to obtain meas-
urements.
Note : Numbers shown are for indication
only.
Success!
4.5
Measurements
4.5.1
Main process value (PV) display
Measurement is started using the Quick Setup Wizard. Once all the param-
eters are programmed, any subsequent power-on sequences will bring up
the main PV display immediately.
Display screen
Operation
The main process value can be
changed using the menu structure.
Press
<ESC>
at any time to return to
the main menu.
Change to the totalizer display, the 3-
line display, and dual display mode by
pressing
<NEXT>,
or to the diagnostic
screens by pressing
<DISP>.
Table 4: Quick Start wizard
