iSocket
®
GSM 706/707
www.isocket.eu
© Copyright Intellectronics 2012
All rights reserved. Version 1.1.2-EN
- 6 -
English
2. Safety Instructions
This appliance complies with accepted technological standards with regard to safety.
Nevertheless, as manufacturers we consider it our obligation to make you aware of the following
safety information. To ensure years of trouble-free enjoyment, and to maintain your guarantee,
please note the following.
Never carry out repairs yourself! There are no serviceable parts in the device.
The operating voltage of the appliance and the mains voltage as well as the type of
current must match (see the rating plate on the underside of the appliance).
Only plug into a correctly installed earthed mains socket.
The device is not intended for direct plug-in equipment, which are not equipped with a
plug. External equipment that connects to the device must have a cord with appropriate
plug.
Some devices are supplied with their own switch, which needs to be disconnected before
they are unplugged. Do not use this product with such devices - it cannot disable the
switch of a remote device.
Do not use external equipment with a faulty plug!
Do not connect to appliances which cannot be left unattended (e.g. certain heaters)!
Do not exceed power load limit and other electrical parameters specified in the technical
characteristics. Check the power of the connected device!
The device is intended only for domestic private non-commercial use. Do not use in
emergency environments: e.g. military, hospitals etc!
This product is not designed for safe disconnection of the controlled equipment from
power network; the device is not equipped with a residual-current device (RCD). Make
sure that your home electrical network meets safety standards.
The product is designed for indoor use in dry area. Do not use it in wet or chemically
aggressive environments! For example, do not use it in the bathroom. It is also not
designed for industrial operation in aggressive environments.
Do not use this device if the casing is damaged!
Do not shake or drop the product. This could cause damage!
Keep away from direct sunlight.
Keep out of reach of children!
Block access to the management and set-up of the device to unauthorised users
(Chapter 5).
Read additional safety information in Chapter 19.
Intellectronics hereby declares that this Smart GSM Power Socket complies with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
At the end of the product's useful life, please dispose of it at appropriate collection points
provided in your country.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: reorient or relocate the receiving antenna; increase the
separation between the equipment and receiver; connect the equipment into an outlet on a
circuit different from that to which the receiver is connected; consult the dealer or an
experienced radio/TV technician for help.
Содержание GSM 706
Страница 1: ......
