iSocket GSM 706, Руководство пользователя

Страница: 13 / 28

iSocket
®
GSM 706/707 www.isocket.eu
© Copyright Intellectronics 2012
All rights reserved. Version 1.1.2-EN
- 12 - English
Telephone numbers must be added in international format (with country code) without
spaces or hyphens. Here are two general examples of how to add and remove number
358-(0)9-123456789
SE3589123456789 – example of adding number
SECNUMBER-3589123456789 – example of removing number
Here 358 is country code for Finland, (0)9 is city code for Helsinki and 123456789 is
local number.
Here are two UNITED STATES examples of how to add and remove number 5555555
SE12125555555 – example of adding number
SECNUMBER-12125555555 – example of removing number
Here 1 is the United States country code, 212 is the city code for New York and 5555555
is a 7-digit local number.
If you add a number to the list when the list is not activated, the protection will be
disabled. Do not forget after adding number to activate security list by command
SECLIST=ON . If you deleted all the numbers by command SECNUMBER-ALL , the
protection will be disabled automatically ( SECLIST=OFF became active).
Make sure that Caller ID is active for the listed number. All numbers that the system
does not recognise are considered to be unauthorised numbers.
We suggest that you always use security list protection, even if you use
password protection. Chapter 6.3 lists more reasons for this alternative.
5.2 Password Protection
The following table shows how to set a password for managing access. The password
must consist of 5 characters. Do not use a simple combination of numbers for a
password! Password 12345, 11111, abcde and other such passwords are not secure!
NOTE! Don't forget to add the old password before the command PASSWORD=x
if you are going to remove password protection or update the password.
Command Description Response Type
PASSWORD=12abc Set password 12abc PASSWORD=***** – OK 30min
PASSWORD=NO Disable password PASSWORD=NO – OK 30min
5.3 Renewal of the Configuration Interval
If you're away from the device but need to reconfigure it and the configuration time has
expired then you can resume the configuration. You will get another 30 minutes window
for configuration. However taking into account that this timeout is an additional level of
security the opportunity to reset this limit should be protected by password and
configured in advance. If you have not done this in advance then you will not be able to
do it remotely.
NOTE! Some mobile operators indicate international numbers when transmitting SMS’s (in our
first example 3589123456789 ), but during the call such operators indicate number in local
format (in our first example it will be 123456789 ). If such behaviour was noticed in your mobile
network you have to add both numbers to the list! It means in addition to the international
number you must also add the local number by the command SE123456789 .