background image

iSocket

®

 GSM 706/707 

                                                                          

               www.isocket.eu

 

© Copyright Intellectronics 2012 
All rights reserved. Version 1.1.2-EN 

             - 26 - 

         English

 

19. Limits of Warranty and Liability  

Our products are subjected to stringent final quality  inspection.  Intellectronics guarantees that 
your device is free from material and production defects. Intellectronics will not be liable for any 

direct or indirect material loss to the owner or other persons caused by use of this device. This 
warranty  only  covers  production  defects.  The  rights  and  benefits  under  this  guarantee  are 
additional  to  your  statutory  rights  which  are  not  affected  by  this  guarantee.    If  your  device 

produces  any  of  the  defects  mentioned  above  within  a  period  of  12  months  after  purchase, 
Intellectronics offers, at its discretion, either a free-of-charge repair or exchange. The guarantee 
applies  only  for  you  as  the  original  end  customer.  It  does  not  apply  to  damage  to  fragile 
components such as the housing, damage caused by improper use, culpable damage, damage 

caused  by  breakage,  heat,  water  or  acts  of  God,  damage  caused  by  unauthorised  tampering  
with  the  device  or  exposure  to  chemicals,  damage  caused  by  overloading  in  the  house  power 
network.  The  life  cycle  of the  relays depends on  how  often  it  is  turned  on  and  off,  but 

Intellectronics  guarantees  its  function  at  least  during  the  warranty  period.  Any  replacement 
hardware product will be warranted for the remainder of the original warranty period, or thirty 
(30)  days,  whichever  is  longer  or  for  any  additional  period  of  time  that  may  be  applicable  in 

your jurisdiction (on condition that the device was purchased from an authorised distributor in 
this  country).  Intellectronics  does  not  guarantee  the  preservation  of  personal  settings  on  the 
device after its repair. Repair or replacement may involve the use of functionally equivalent new 
or used parts. Replaced parts become the property of Intellectronics. The warranty will be lost if 

safety  instructions  not  complied  with  (see  Chapter  2)  when  using  the  device,  and  if  the 
conditions of use were violated. Intellectronics disclaims any responsibility for damage to health 
or  property  suffered  as  a  result  of  using  this  device  and  failure  to  comply  with  safety 

instructions.  Improper  use,  disassembling  or  product  modification  causes  warranty  loss. 
Intellectronics does not guarantee that this product will provide uninterrupted operation of the 
controlled equipment; this device is not an uninterruptible power supply (UPS). This product is 

not designed for safe disconnection of the controlled equipment from power network; the device 
is not equipped with a residual-current device (RCD). Correct function of the switching function 
all  that  is  guaranteed.  Security  features  in  this  device,  as  well  as  functions  related  to 
temperature  control,  are  optional  and  cannot  be  considered  as  a  substitute  for  professional 

systems.  Intellectronics  assumes  no  liability  for  damage  to  property  in  connection  with  the 
operation of these functions.  Intellectronics provides protection against unauthorised access to 
the  device,  but  gives  no  guarantees  regarding  the  impossibility  of  such  access  and  is  not 

responsible  for  the  consequences  of  such  lack  of  access.  Intellectronics  reserves  the  right  to 
modify  the  device  and  its  software  without  further  notice.  Differences  in  the  software  not 
covered  in  these  instructions  are  acceptable  and  not  considered  as  defects  and  cannot  be  a 

matter for warranty service. Releasing new software, including new functions, is not an excuse 
for its replacement under warranty terms and can be done for an additional fee.  Illegal use of 
remote listening option and the illegal extraction of information is a violation of the law in most 
countries. Before using this function consult with a lawyer. Intellectronics categorically prohibits 

the use of this device for unlawful purposes and is not responsible for illegal use of the device.  
Please make sure that mobile network is available in the area. Bad coverage is not  a warranty 
matter.  Please  ensure  that  mobile  phones  are  permitted  in  the  area  before  operating  the  unit 

(eg, hospitals, petrol stations, etc.). If the use of a mobile phone is forbidden, do not use the 
device, as it can have negative influence to other electronic systems. To get warranty service, 
you must provide proof of payment and this guarantee. The guarantee must be duly filled in and 
must  specify  the  serial  number  of  the  device,  if  it  does  not  contradict  the  legislation  of  the 

country where product was legitimately purchased. 

20. Contacts 

The most current contact information about our company is supported on the official website 

www.intellectronics.eu

.  The  most  current  product  information  can  be  found  on  the  official 

website 

www.isocket.eu

 

Thank you for choosing our products.

Содержание GSM 706





























Отзывы: