iSocket GSM 706, Руководство пользователя

Страница: 16 / 28

iSocket
®
GSM 706/707 www.isocket.eu
© Copyright Intellectronics 2012
All rights reserved. Version 1.1.2-EN
- 15 - English
be confused when there is no response from the device. Once you are familiar with the
device, you can then disable the error message responses. In the beginning however, we
strongly recommend configuring the list of allowed numbers (Chapter 5.1) and keeping
the option
SMSCONFIRMUNAUTH , which is set to OFF by default.
7. Measurement and Control of Temperature
The features described in this chapter are not available on the "Light" models.
7.1 Thermometer
iSocket GSM 706/707 has a built-in thermometer, which measures the temperature of
the environment and can provide it via SMS. Information about the temperature can be
available 10 minutes after the device is switched on.
Command Description Response Type
TEMPERATURE Informs about temperature in the room TEMPERATURE: 25C, TEMPERATURE: 77F Ctrl
STATUS Request for socket's status and
temperature information includes Power socket OFF …
TEMP: 25C Ctrl
7.2 Thermostat
The device has a built-in thermostat that can control both heating and
cooling systems. In the latest model, operation with the thermostat is much simpler!
The thermostat feature allows you to control the main power socket and change it
depending on the pre-configured off-temperature. The thermostat is operational 10
minutes after the power is switched on. The temperature reading interval is 1 minute
(for models manufactured after July 2012). If the thermostat is enabled, the first
reading will occur 10 minutes after the power was switched on. If the thermostat was
already activated, then the first reading will occur no later than 1 minute from the time
it was activated. The thermostat is an optional extra for iSocket GSM 706/707 which
should not be considered a precision instrument. The accuracy of the thermostat is ±
2˚C (± 3.6F).
Command Description Response Type
THERMOSTATON Activate thermostat THERMOSTATON – OK
THERMOSTAT=HEATING
TEMPOFF=10
Attention! Thermostat is working
now!
Ctrl
THERMOSTATOFF Disable thermostat THERMOSTATOFF – OK
Attention! Thermostat was
disabled!
Ctrl
THERMOSTAT=
HEATING
Set the condition of thermostat. Use this
value if heating system is connected to
device
THERMOSTAT=HEATING – OK
TEMPOFF=10
THERMOSTAT: Disabled
30min
THERMOSTAT=
COOLING
Set the condition of thermostat. Use this
value if cooling system is connected to
device
THERMOSTAT=COOLING – OK
TEMPOFF=22
THERMOSTAT: Enabled
30min
TEMPOFF=10 Set the temperature for turning off the
main socket (the value from 0 to 50
Celsius, or from 32 to 122 Fahrenheit for
"US" models). Works only if thermostat is
enabled.
TEMPOFF=10 – OK
THERMOSTAT=HEATING
THERMOSTAT: Disabled
30min
THERMOSTAT? Information about thermostat configuration THERMOSTAT: Enabled
THERMOSTAT=HEATING
TEMPOFF=10
Inf
NOTE! iSocket can be supplied in Celsius or Fahrenheit degree versions. The standard
for the "US" models is Fahrenheit.