manualshive.com logo in svg

ISHIDA IGB-150, Руководство по обслуживанию

Поделиться
Скачать
ISHIDA IGB-150 Скачать руководство пользователя страница 3

Manual No. 085-3435-07 

2/45 

IGB/IGX Series (Overseas Specifications) Service Manual 

OUTLINE 

• 

Purpose of this manual 

• 

This manual is to be used as a reference for the maintenance servicing of IGB or IGX series. 

• 

Related manual 

• 

For placing the product, mounting the display pole, setup mode and setup values, refer to the 
operation manual. 

• 

Symbols in the description 

1. Warning symbols 

Symbol Meaning 

Danger

 

Indicates information that, if not heeded, is likely to result in loss of life or serious 
injury. 

Warning

 

Indicates information that, if not heeded, may result in loss of life or serious 
injury. 

Caution

 

Indicates information that, if not heeded, could result in relatively serious injury, 
damage to the machine or faulty operation. 

 

2. Explanatory symbols 

Symbol Meaning 

Note

 

Indicates additional information of particular importance. 

Reference

Reference

 

Indicates a page to refer to. 

Information

Information

 

Indicates information to help you understand the related text. 

 

• 

Readers of this manual 
This manual is designated for use by servicing personnel. Use by other personnel is not permitted. 

• 

This manual may be revised in accordance with modifications to the machine. 

• 

All rights are reserved. Copying any part of this manual is prohibited without the permission of Ishida. 

 
 

Содержание IGB-150
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды