iSHAN YGL-G, Руководство по эксплуатации

Страница: 21 / 27

21 - 27
3-1 Control panel
Fig.12
3.1.1 Intermittence Time/ Lubrication Time Display
The setting of intermittent time and lubrication time can be adjusted by pressing any
of ” ▲ ” or ” ▼ ” for two seconds and read from value from the display. If no further
action, the timer will restart after 5 seconds.
Intermittence time display indicates the set value and the remaining of intermittent
time during the lubrication unit working. Lubrication time display indicates the set value
and the remaining of intermittent time during the lubrication unit working. When pressing
any of the ” ▲ ” and ” ▼ ” of Lubrication Time/ Intermittence Time for two seconds, the
set-up value will be shown. If no further action, the timer will restart after 2 seconds.
3.1.2 Intermittence Time/ Lubrication Time set up
Press any of ” ▲ ” or ” ▼ ” for two seconds and then enter time setting mode by
pressing ” ▲ ” or ” ▼ ”to adjust time from 1 to 999 for interval and lubricating.
Continuously press ” ▲ ” or ” ▼ ”to fast increase or decrease value. During time setting
mode, two indicators will spark in the same time.
Time unit for intermittence is minute ; Time unit for lubrication is second
If no further action, the timer will restart after 5 seconds and run with new setting. The
lubrication indicator is light and intermittence indicator is dark during lubricating. On the
contrary, the intermittence indicator is light and lubrication indicator is dark at the interval.
Indicator light of LUB.(Yellow)
(Yellow) (Yellow)LUB.
lubrication
Display of INT.
Time
Display of LUB.
Time
Indicator light of INT. (Green)
Indicator light of alarm (Red)
alarm indicator lamp(red)
Increase of LUB. time
Key for add lubrication time
Decrease of INT. time
Key for reduce intermittent
Increase of INT. time
Key for add intermittent time
Decrease of LUB. time
Key for reduce
RES (Feed pushbutton)