Isgus PERFECT 2030, Руководство по эксплуатации

Страница: 74 / 138

4-42 Getting Started Chapter 4
Signal Operation
By programming the time recorder’s signal circuit, an external signaling device, such
as a horn or a bell, can control the signaling of coffee breaks or work start and stop
times.
Programming the signal circuit is very similar to programming ribbon color changes.
Up to 32 signals for each day of the week can be programmed and the user must
define day, time and duration of each external signal event.
Hint
Your PERFECT time recorder is provided with a low power signal
output for the controlling of an external relay. To this external
relay it is possible to connect an external signal device.
It is not allowed to mount the external relays and external signal
devices into the unit.
Please refer to the "Technical Specifications“ appendix in this
manual.
In order to simplify programming, the time recorder has a copy function which allows
the copying of daily settings to the fields of the following day or range of days. If, for
example, the signal times for Monday apply to all workdays, you just need to
program Monday’s signal times and then copy them to the rest of the days in the
week.
The signal operation can be activated at any time, and already saved values can be
modified.
Hint
In order to turn off signals for holidays, you only need to
"disable“ the feature. When the holidays are over and you again
wish to turn the signal program on, just re-enable the feature and
the time recorder will have remembered the previous signal
programming.
Factory default setting:
→
function deactivated