isel automation GFV 102/62, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 23

12
isel flat bed installation GFV
Memory
For the computer to work error-free, approx. 600 Kbytes of conventional main memory and
approx. 140 kilobytes of high memory should be available.
You can check your memory when calling the Memmaker DOS program.
There, enter: EMS —> no and Search high memory area.
Thus, sufficient memory should be available.
Workpiece clamping
Use only suitable secure jigs if you set up your machine.
Always pay attention to a fixed seating of the workpieces.
6.2 Cover interlocking
- Basically, the machine must be in the home position (reference point) in order to open the
cover. An exception is if the machine is in the test mode or you bypassed the safety
function using the triangular key.
- The spindle can turn only if the cover is interlocked (exception in the TEST mode).
- For special occasions (if a switch is defective or in case of a power failure etc.), you can
open the cover bolting device manually using the triangular key.
1. Power-down the machine.
2. Without using excessive force, turn the
triangular key half a revolution to the left and
open the cover.
You may not operate
the machine in this state.
The processing machine remains de-
energized.
3. Turn the triangular key again to the right.