isel automation GFV 102/62, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 23

15
isel -flat bed installation GFV
6.5 Operating modes
- Auto
In the AUTO operating mode, a loaded program is automatically executed and thus your
workpieces are machined. During processing, the cover is locked. You can only open the
cover after the machine has reached the HOME position and the machine (spindle) is
switched off.
Press the COVER key before opening the cover. After closing, the cover is automatically
locked again.
- Test
For testing and checking, you can run the machining program with the cover open if you
turn the key-operated switch to the right (test mode). Now, the program is only processed
for the time the ACKNOWN key is pressed.
The test operation has no influence on the machine, it remains powered-up.
Injury hazard!
This key may only be used by expert and authorized personnel since no protection
against moving machine elements is guaranteed in the test operation after opening
the cover.