isel automation GFV 102/62, Инструкция по эксплуатации и техническому обслуживанию

Страница: 14 / 23

14
isel flat bed installation GFV
6.4 Activating the software
The iseldrv.exe machine driver is already installed (DOS) on the control computer (CNC
servo controller). You only have to load it before any start of the machining software.
It is recommended to load the driver using the drv.bat batch file. (You activate the program
and inform the computer where the default settings are stored for your machine.) If the file
does not exist yet you can easily generate it yourself (edit drv.bat).
The content of the batch file is: LH \servo\iseldrv \servo\servo.ini
Enter ’drv’ and (return). The driver prompts you to power-up the machine (press the
POWER button).
Next, start the machining software (REMOTE, ISY etc.) provided that the programs are
already installed.
As a example: Start the REMOTE program by changing to the c:\remote
directory and enter ‘remote’ .
Alternatively, you can also use a batch file
(refer to the REMOTE machining examples manual).
Please, refer to the corresponding manuals and/or readme files on the installation floppy
disks for further notes on the software.
You find all descriptions regarding the handling of the software in the enclosed manuals.
The software contained in your scope of delivery, e.g. ISY or ProLeiSys, is stored on a
CD or floppy disk. The manuals are also included.