isel automation GFV 102/62, Инструкция по эксплуатации и техническому обслуживанию

Страница: 4 / 23

4
isel flat bed installation GFV
1 Introduction
The isel GFV Flat Bed Machining Systems are proven CNC machines that offer an
abundance of possibilities for three-dimensional processing of work pieces.
The machines are built and equipped in various sizes and designs. Tailored standard
sections and drive elements that are combined according to requirements form the basis.
Therefore, the external appearance of the machines can be very diverse.
The internal life, therefore the substantial set-up of mechanics and the electrical control is
common to all machines. Before delivery, every individual machine is tested and run-in in
detail for many hours.
As a requirement for your work you need basic knowledge in CNC technology and PC
application, a computer, and the control electronic, an electrical outlet and some creativity.
Please take note of this short instruction now so that you
· set up the installation properly,
· can work surely, quickly and effectively,
· keep away dangers of persons
· and thus exploit the full potential.
The explanations in this instruction are based on a standard scope of delivery with which
the machine is ready for operation. You can simply skip explanations that do not concern
your machine (e.g. in case of accessories and software).
Please note the additional reference manuals and instructions for the installation and
commissioning of software and accessories.
We wish you much success and pleasure for the future work with the flat bed installation.