Iseki TG5330, Руководство по эксплуатации

Страница: 79 / 176

TG5330,5390,5470
78
OPERATION
- POWER SHIFT TYPE & HST TYPE -
BREAK-IN PERIOD
Operation of Tractor within the first fifty hours can be a
major factor in determining the performance and life of the
engine and Tractor:
・ The engine may be operated at full rpm but excessive
load should be avoided. If engine begins to lug ,
operate in a lower gear to maintain higher engine
speed.
・
Check coolant level and check engine, transmission
and other oil levels frequently during break-in period.
Watch for evidence of leakage of above fluids.
Replenish levels as required and repair any leaks that
may have formed.
・ Tighten any nuts, bolts, or screws that may have loos-
ened and tighten as necessary. This is especially true
of wheel retaining bolts.
All fasteners on this Tractor
are metric.
・ Be observant of clutch pedal free-play adjustment and
brake adjustment and readjust as required. Lining
materials used on clutch and brake discs bed in in
the first few hours of operation and may necessitate
the need for early and frequent re adjustment.
・
Keep area around fuel tank filler clean and make sure
diesel fuel is correct grade and free of contamination.
・
Initial engine oil and oil filter change is after first fifty
hours of operation. Subsequent change interval is
every one hundred fifty hours for engine oil and filter.
CAUTION: Proper maintenance practices can-
not be over-emphasized. They are required
for safe operation. Consult Lubrication and
Maintenance section for full details.
STARTING
Pre-Start Inspection
Prior to daily start-up of Tractor, a few basic procedures
should be followed to ensure Tractor is in operating order
to insure life and dependability:
・ Make sure all safety shields are in place and secured
properly.
・ Make sure operator is instructed on correct and safe
operation of Tractor and related attachments or imple-
ments.
・ Check coolant, engine oil and transmission oil levels
and replenish as necessary.
・ Check fan belt tension and adjust as required.
・
Make sure radiator, air intake screens and radiator
screen are clear of debris to provide maximum engine
cooling.
・
Check operation of clutch, brake and throttle controls.
All controls must operate freely and be adjusted cor-
rectly.
・
Conduct a general inspection of tires, tire pressure
and wheel bolt torque. Observe for external signs of
leakage and correct before operating Tractor. Check
steering for excessive looseness.
・ Check for adequate fuel supply. It is recommended
fuel tank be filled following each day«s use to reduce
condensation and provide full tank for next use.
・ Check operation of lights and warning flashers. If
Tractor is to be transported on public road, ensure
slow-moving vehicle emblem is in place.
NOTE: Requirements may vary regarding use of warning
flashers and slow-moving vehicle emblem
depending on locality. Check local safety codes.
WARNING: Carefully read and understand the
SAFETY section of this manual. Your life, and
that of others, can be in danger during the
starting of the Tractor.
Always start and operate the engine in a well
ventilated area.
If in an enclosed area, vent the exhaust to the
outside.
DO NOT modify or tamper with the exhaust
system.