Iseki TG5330, Руководство по эксплуатации

Страница: 35 / 176

34
TG5330,5390,5470
DIFFERENTIAL LOCK PEDAL
FIG. 4-21: When differential lock pedal, 1, is depressed,
both rear axles are locked together to provide equal trac-
tion to both rear wheels. This is especially important when
operating in loose soil or slippery conditions.
IMPORTANT: Depress main clutch pedal and stop
before engaging differential lock.
Disengage differential lock, by releasing foot pedal. If lock
does not immediately disengage, tap right and left brake
pedals alternatively until pedal is released.
CAUTION: When differential lock is engaged,
steering ability of Tractor will be greatly
reduced. Disengage before attempting a turn.
Do not use during transport.
FOUR-WHEEL DRIVE SHIFT LEVER
FIG. 4-22: Shift lever, 1, engages and disengages drive
for the front axle. Lever forward, the front axle (4-WD) is
disengaged. Lever rearward, the front axle is engaged,
and power is available to both front and rear axle.
IMPORTANT: Depress main clutch pedal and stop
Tractor before engaging or disengaging
four-wheel drive.
Do not use 4-WD on hard surface. Rapid
wear of front tires and possible drive line
damage could occur if 4-WD is operated
for prolonged periods on hard surface.
REAR PTO SELECTOR LEVER
FIG. 4-23: Rear PTO (power takeoff) selector lever, 1,
controls rear PTO on Tractor.
When lever is forward, 540 rpm rear PTO is selected.
When lever is rearward, 1000 rpm rear PTO is selected.
When lever is returned to rear neutral (N) position, the
gear drive is disengaged
Rear PTO selector lever is used with PTO control switch
on instrument panel. Refer to Operation section for com-
plete details.
IMPORTANT: Before moving rear PTO selector lever,
PTO control switch on steering column
must be off.
CAUTION: Always shut off PTO and shut off
Tractor engine before servicing PTO-driven
implement. Allow all movement and motion to
stop before leaving operator’s seat.
1
FIG. 4-21
1
FIG. 4-22
1
FIG. 4-23