Iseki SXG216, Руководство по эксплуатации

Страница: 72 / 94

III. MOWER OPERATION
71
3. STARTING MOWING OPERATION
a. Start the engine and turn the throttle lever to the
intermediate position between the low speed (
t
)
and high speed (
r
) positions.
1
A
B
(1) Throttle lever
b. Pull the lift lever to raise the mower deck.
(1) Lift lever
c. Release the parking brake.
d. Push down the HST forward travel pedal gradually
to drive the machine into the working site.
CAUTION: Before starting to move the ma-
chine, be sure to lock the rear gauge wheels
either in vertical or slanted positions.
e. Release the HST pedal gradually to stop the lawn
mower.
f. Lower the mower deck by the lift lever.
g. Shift the PTO lever to the ON ( ) position.
IMPORTANT: When engaging the PTO clutch, slow
down the engine speed sufficiently
for safety.
CAUTION: Whenever you encounter any
trouble with the mower, ask your dealer
for repair immediately.
WARNING:
• As soon as the PTO lever is shifted to
the ON ( ) position, the mower blades
start rotating and eject cut grass or
stones through the discharge opening.
Consequently, before operating the PTO
lever make sure that there is no people,
animals, or physical properties like
buildings, cars, etc. within a range where
ejected grass or stones may reach.
• The mower blades should be turned
only on turf or grassland with the mower
deck lowered.
h. Turn the throttle lever to the high speed (
r
) position
to raise engine speed.
i. As the HST forward travel pedal is depressed
gradually, the lawn mower starts to travel.
CAUTION: Be sure to start mowing at suf-
ficiently low speeds and increase travel-
ling speed gradually.
IMPORTANT: The screens of the air-intake openings
provided under the steering wheel,
and the radiator screen should be kept
clean. Never keep on operating with
clogged screens, or the engine may
be overheated, which may result in
engine seizure.
4. CLEANING A MOWER DECK AND CHUTE
CLOGGED WITH GRASS
When mowed grass is not ejected from the mower
deck or the mower chute is clogged, stop operating
immediately and remove clogged grass.
When the discharge opening inside chute (3) is
clogged:
a. Shift the PTO lever to the OFF ( ) position and
move the lift lever upper to raise the mower deck in
the highest position.