Iseki SXG216, Руководство по эксплуатации

Страница: 38 / 94

VII. OPERATION
37
1. BEFORE STARTING THE ENGINE
CAUTION:
• Before starting the engine, be sure to
carry out the pre-operation inspection in
accordance with the periodical inspec-
tion table on page 55.
• Follow instructions given in “I. FOR
SAFE OPERATION.”
• Observe instructions given on the caution
labels on the machine and mower deck.
2. STARTING THE ENGINE
WARNING: Never attempt to start the
engine in an enclosed place with poor ven-
tilation. Be sure to provide sufficient venti-
lation, for exhaust fumes can be lethal.
IMPORTANT: Before starting the engine, sit down in
the operator’s seat properly, depress
the brake pedal, and shift the PTO le-
ver to the OFF position ( ), otherwise
the engine cannot be started.
(1) Operator's seat (3) Brake pedal
(2) PTO lever (4) Throttle lever
a. Close the engine hood securely and sit in the op-
erator’s seat properly.
b. Shift the PTO lever to the OFF position ( ).
c. Depress the brake pedal fully.
d. Insert the starter key into the starter switch and turn
the key to the ON position (
O
). Make sure that the
charge lamp and oil pressure lamp are both lit.
VII. OPERATION
3 1 2
Monitor array (2) Oil pressure lamp
(1) Overheat warning (3) Charge lamp
e. Shift the throttle lever to an intermediate speed
position, that is, between the high speed and low
speed positions (
r
and
t
).
1
A
B
(1) Throttle lever (A) High speed (B) Low speed
f. Turn the key to the pre-heating position (
G
) and hold
it there about five to ten seconds.
IMPORTANT: Never keep on pre-heating more than
10 seconds, or the glow plugs may
burn out.
When the engine fails to start, wait
at least 20 seconds before the next
attempt.