Iseki SXG216, Руководство по эксплуатации

Страница: 71 / 94

SCMA40
70
1. BEFORE OPERATION
CAUTION:
• Before starting mowing operation, be
sure to equip ISEKI standard grass col-
lector. Never mow the grass without the
collector or the lawn mower scatters
grass, stone and other flying debris,
which is very dangerous.
• Become familiar with how to operate
the lawn mower and understand safety
instructions by reading this manual
carefully.
• Make sure that all safety covers and
guards are installed in position.
• Make sure that the blade bolts are tight-
ened securely.
• Before moving the lawn mower into the
working site, check the whole area and
get rid of all obstacles such as stones,
wood, empty tins, bottles, wires, etc in
older to assure safe operation.
• Make sure that the mower operation will
not cause any injury to children, animals,
bystanders, or damage to trees, build-
ings, etc.
• Check the place to mow for bumps,
ditches, mounds, steps, slopes, inclina-
tion, softness, water pools, etc. ahead of
time to avoid accidents such as turnover,
fall, side-sliding of the lawn mower.
2. CUTTING HEIGHT ADJUSTMENT
(1) Spring clip pin
a. Raise the mower deck by the lift lever.
III. MOWER OPERATION
b. Select one of the setting holes to get the required
cutting height, insert the pin, and retain it with the
spring clip pin. The label showing the relationships
between the setting holes and cutting heights is
stuck on the mower deck.
c. Also set the cutting height of the gauge wheels by
re-setting the setting hole for the setting pin with the
spring clip pin removed.
d. The right and left gauge wheels should be set to the
same cutting height.
e. Lower the mower deck by the lift lever.
CAUTION: Before operating the lift lever,
be seated in the operator’s seat and make
sure of the safety conditions when lower-
ing the mower deck.