SXG
10
3.14. Never attempt to do the mowing operation
without the discharge cover in place or with the
cover left open.
3.15. Never attempt to operate without the drive shaft
cover in place.
3.16. Do not attempt to adjust the cutting height while
the engine is running.
3.17. Adjust the cutting height with the gauge wheels
in accordance with the condition of the ground
surface at the working site. Mowing on rough
ground with low cutting height may cause
the blades to hit soil or stones, which is very
dangerous.
3.18. If you strike an object or if the lawn mower
vibrates abnormally, stop the lawn mower im-
mediately, wait for all moving parts to stop,
and inspect the cutting unit(s). Make all repairs
before you resume operation.
3.19. Be sure to keep the grass discharging part
clean. A clogged discharging part may cause the
discharge cover to open, resulting in scattering
of grass and stones, which is very dangerous.
3.20. Never allow grass or leaves to accumulate
around heated parts such as the engine and
the muffler, or this may cause a fire.
3.21. Before moving the lawn mower to another
place, be sure to stop the mower blades and
lift up the mower deck. Otherwise, they may hit
stones and scatter them around, which is very
dangerous.
3.22. When driving over a levee or a step, stop the
mower blades, lift up the mower deck, and move
the lawn mower straight to the levee and make
it climb over slowly. Avoid climbing over a levee
too high, or the lawn mower may fall sideways
or turn over.
3.23. Stop the cutting unit(s) when you are crossing
gravel areas
3.24. Watch for traffic when you are operating the
lawn mower near a roadway or when crossing
a roadway.
3.25. Never attempt to use the lawn mower to draw
an implement or a trailer. It is not designed to
draw a load.
3.26. Stay alert and stop the lawn mower if people or
pets enter the area.
FIG. 6
Содержание SXG216
Страница 1: ...ISEKI DIESEL RIDING MOWER LAWN MOWER MOWER DECK COLLECTOR SXG216 SCMA40 SBC402X ...
Страница 66: ...WIRING HARNESS CABLE 65 GREEN XI ELECTRIC WIRING ...
Страница 67: ......
Страница 93: ......