manualshive.com logo in svg

Iseki SXG216, Руководство по эксплуатации

Поделиться
Скачать
Iseki SXG216 Скачать руководство пользователя страница 36

V. CONTROLS AND METERS

35

4. OTHER CONTROLS

4.1. SAFETY SWITCHES

The operator’s seat, Master brake pedal, PTO lever 
and engine hood are equipped with a safety switch re-
spectively. Before starting the engine, close the engine 
hood securely, the operator should be seated in the 
operator’s seat, keep the master brake depress posi-
tion and shift the PTO lever to the OFF ( ) position.

CAUTION: When the engine does not start 
due to a defective safety switch or does 
not stop when the operator has left the 
operator’s seat, consult your dealer with-
out fail.

4.2 HEIGHT ADJUST DIAL

60

1

2

    (1) Height adjust dial
    (2) Height adjust indicator

Height adjust dial could adjust the height of lowest 
postion of mower deck.
Turn the dial forward (

), the height of lowest posi-

tion would be low.
Turn the dial backward (

), the height of lowest 

postion would be high.

IMPORTANT:  In case of using the height adjust dial 

only, cutting height would be uneven 
in the rough. Please use the height 
adjust dial with gauge wheel.

 

 

Before turning height adjust dial, shift 
the mower lift lever to most highest 
position.

 

 

When attaching or detachinng the 
mower deck, turn the height adjust dial 
to most lowest position (

d

) before that.

Содержание SXG216































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды