ise smart connect Modbus Vaillant
Installation, electrical connection and operation
Order No.
S-0002-007
Product Manual Page 9 (45)
Mounting/removing a cover cap
A cover cap can be mounted for protection of the power supply connections from dangerous voltage,
particularly in the connection area.
The cap is mounted with an attached power supply terminal and a connected power supply line to the
rear.
Mounting the cover cap: The cover cap is pushed over the supply terminal until it audibly en-
gages (cf. Figure 2:
Mounting/removing a cover cap A
).
Removing the cover cap: The cover cap is removed by pressing it in slightly on the side and
pulling it off to the front (cf. Figure 2:
Mounting/removing a cover cap B
).
Figure 2: Mounting/removing a cover cap.
