ISE 1-0002-003/100, Руководство по эксплуатации продукта

Страница: 30 / 60

ise smart connect KNX Hue
Configuration
Order No. 1-0002-003 Product Manual Page 30 (60)
Object Name Direction Data width DP type Flags
(CRWTU)
n f(n) Obj
1 20*n+9 = 29
2 20*n+9 = 49
3 20*n+9 = 69
4 20*n+9 = 89
5 20*n+9 = 109
6 20*n+9 = 129
7 20*n+9 = 149
8 20*n+9 = 169
9 20*n+9 = 189
10 20*n+9 = 209
11 20*n+9 = 229
12 20*n+9 = 249
13 20*n+9 = 269
14 20*n+9 = 289
15 20*n+9 = 309
16 20*n+9 = 329
17 20*n+9 = 349
18 20*n+9 = 369
19 20*n+9 = 389
20 20*n+9 = 409
21 20*n+9 = 429
22 20*n+9 = 449
23 20*n+9 = 469
24 20*n+9 = 489
25 20*n+9 = 509
Set "green" colour
–
Light "n"
Write 1 byte 5.001 C-W--
Rubric:
Colour
Data type:
Percent (0 to 100%)
Function:
Sets the green colour value of light "n" between 0% (0) and 100% (255).
Description:
1-byte object for specification of the green colour value of light "n".
Important note: If the individual communication objects for R/G/B are used
for the RGB value, the entire RGB is not transferred to the light until all three
individual values have been received or 200 ms have passed so as to avoid
incorrect intermediate states.
Behaviour of a Hue Lux: It is not possible to change just one colour (see
Chapter 1.3 Hue Lux). A distinction should be made between two cases:
> All three individual values are received within 200 ms:
The brightness value is set to the highest individual value in the same
way that the RGB colour code is set.
> Only one or two individual values are received within 200 ms:

The brightness value is increased accordingly if one of these values
is higher than the current set value.

This input is ignored if both values are lower than the current set
value.