IS5COM IES26G Series, Руководство пользователя

Страница: 76 / 79

iES26G Series User’s Manual
iS5 Communications Inc. 76
no event smpt I Disable port event for SMTP switch(config)#interface
fastethernet 3
switch(config-if)#no event smtp
show systemlog P Show system log client & server
information
switch#show systemlog
5.15 Commands Set List—SNTP command set
Commands Level Description Example
sntp enable G Enable SNTP function switch(config)#sntp enable
sntp daylight G Enable daylight saving time, if SNTP
function is inactive, this command
cannot be applied. switch(config)#sntp daylight
sntp daylight-period
[Start time] [End time]
G
Set period of daylight saving time, if
SNTP function is inactive, this
command can’t be applied.
Parameter format: [yyyymmdd-
hh:mm] switch(config)# sntp daylight-
period 20060101-01:01
20060202-01-01
sntp daylight-offset
[Minute]
G
Set offset of daylight saving time, if
SNTP function is inactive, this
command cannot be applied. switch(config)#sntp daylight-offset
3
sntp ip
[IP]
G
Set SNTP server IP, if SNTP function
is inactive, this command can’t be
applied. switch(config)#sntp ip 192.169.1.1
sntp timezone
[Timezone]
G Set timezone index, use “show
sntp timzezone” command to get
more information of index number switch(config)#sntp timezone 22
show sntp P Show SNTP information switch#show sntp
show sntp timezone P Show index number of time zone
list switch#show sntp timezone
no sntp G
Disable SNTP function switch(config)#no sntp
no sntp daylight G Disable daylight saving time switch(config)#no sntp daylight
5.16 Commands Set List—i-Ring command set
Commands Level Description Example
Ring enable G Enable O-Ring switch(config)# ring enable
Ring master G Enable ring master switch(config)# ring master
Ring couplering G Enable couple ring switch(config)# ring couplering
Ring dualhoming G Enable dual homing switch(config)# ring dualhoming
Ring ringport
[1st Ring Port] [2nd Ring
Port]
G Configure 1st/2nd Ring Port switch(config)# ring ringport 7 8
Ring couplingport
[Coupling Port]
G Configure Coupling Port switch(config)# ring couplingport 1
Ring controlport
[Control Port]
G
Configure Control Port switch(config)# ring controlport 2