iES26G Series User’s Manual
iS5 Communications Inc.
45
4.1.11.1
Access Control List
Access Control List Interface
The following table describes the labels for the Access Control List screen.
Label
Description
Group Id
Type in the Group ID from 1 to 229. (Maximum 255,26 rules for
DHCP filter).
Action
Permit and Deny.
Port
Select specific port to apply the ACL.
VLAN
Select any or a particular VID.
Packet type
Select packet type – IPv4 or Non-IPv4.
Src IP Address
Select any or assign an IP address with Subnet Mask for source IP
address.
Dst IP Address
Select any or assign an IP address with Subnet Mask for destination
IP address.
IP Fragment
Set this item as to whether the fragment is checked or not.
L4 Protocol
Assign the L4 protocol from among ICMP (1), IGMP (2), TCP or UDP.
Current List
Displays the current list information.
Add
Add entry to Access Control List
Del
Remove entry from Access Control List
Help
Show help file.
4.1.11.2
IP Security
IP security can be enabled/disabled and remotely managed from the WEB, Telnet or SNMP.
Additionally, IP security can also restrict remote management to specific IP addresses. Only
secure IP addresses can manage the switch remotely.
