iES26G Series User’s Manual
iS5 Communications Inc.
26
4.1.4.3
DHCP Server – Port and IP bindings
A specific IP address can be assigned from the dynamic IP range to a specific port. While the
device is connecting to the port, it will ask for a dynamic IP to be assigned. The system will
automatically assign the specific IP address assigned before connecting to the device.
DHCP Server Port and IP Binding interface
The following table describes the labels for the DHCP Server - Port and IP Binging screen.
Label
Description
IP
Enter the specific IP (must be inside the assigned dynamic IP range) to assign
to an individual Port.
Apply
Click “
Apply
” to set the configurations.
Help
Show help file.
4.1.5
Port Setting
4.1.5.1
Port Control
By this function, you can set the state, speed/duplex, flow control, and security of the port.
Port Control interface
The following table describes the labels for the Port Control screen.
Label
Description
Port No.
Set port number.
State
Set the current port status to enable/disable. If the port is disabled
then it will not receive or transmit any packet.
Negotiation
Set the auto negotiation status of the port.
Speed/Duplex
The port can be set to Auto negotiate to:100 full, 100 half, 10 full, 10
half modes.
