IRSAP FLECHE AIR 1322, Руководство пользователя

Страница: 56 / 104

EN
56
1) press the navigation button (►) until the program symbol
is selected, as in Fig. 19;
2) press (OK) to confirm. At this point a program on the top right of the display will start to blink as in Fig.
20;
3) press the (+) or (–) buttons until the customised program that you want to configure is displayed, U1
or U2.
4) press the button (OK ) for at least 1 second;
5) press (OK) to confirm your choice; the screen in Fig. 21 will appear.
Fig. 21
When the “getting out of bed ” symbol appears, it means that you have to set the time for starting the
day.
6) use the ( + ) or ( – ) buttons to adjust the time of the first step of the program , that is when to start the
system operation in the day, for example at 6.00 as in Fig.22;
Fig. 22
7) press (OK) to confirm and move on to the next step; by default the "leaving home" symbol
will appear on the display, as shown in Fig.23;
Fig. 23
8) use the (
+
) or (
–
) buttons to choose the next phase of the program (blinking icon) between the two
options available:
a. choose the “going to bed” symbol, corresponding to the end of the day, to close;
the thermostat will ask you to copy the program of the day, which you just have set and decided
to close, onto the following days, as shown in Fig. 24:
Fig. 24