![IRIS G115E / TUTOR T.1 Скачать руководство пользователя страница 25](http://html.mh-extra.com/html/iris/g115e-tutor-t-1/g115e-tutor-t-1_flight-manual_2090541025.webp)
I A P 2 0 2 1 . 0 0 1 - A F M /
I R I S G 1 1 5 E / T U T O R T . 1
P a g e
|
25
FOR SIMULATION PURPOSES ONLY
Pressing the ident button will comply with a request to squawk ‘Ident’; when
the ident button is pressed while in the GND, ON or ALT modes, “IDT” will be
illuminated on the display for approximately 18 seconds.
The aircraft will then be positively identified to the ATC unit. In normal use the
reply indicator, to the right of the display window, will flash the reply
nomenclature “R” in response to a valid Mode S or ATCRBS interrogation.
NAVIGATION EQUIPMENT
Introduction
The VOR/ILS/DME equipment installed in the IRIS G115E / Tutor T.1 consists of a
KN 53 NAV receiver, a KX 155A NAV/COMM transceiver, a KMA 26 with
Marker receiver and a KN 63 digital DME receiver.
The information from these units is displayed on a KCS 55A Horizontal Situation
Indicator (HSI) and a KI 204 VOR/ILS/Glideslope indicator known as an Omni
Bearing Selector (OBS).
Bendix/King KX155A Navigation Radio
The NAV facility of the KX 155A/KX 165A NAV/COMM transceiver is a
sophisticated unit capable of digitally displaying active and standby
frequencies, VOR radial information, course deviation information and ILS
azimuth information.
DME information is displayed on the separate DME indicator and VOR/ILS
information is displayed on the OBS.
Operation of the COMM facility is described in the previous section.
The unit operates over the frequency range 108.00 to 117.95 MHz in 50 KHz
increments and is turned on using the On/Off/Vol control located on the left
of the unit.