![IRIS G115E / TUTOR T.1 Скачать руководство пользователя страница 20](http://html.mh-extra.com/html/iris/g115e-tutor-t-1/g115e-tutor-t-1_flight-manual_2090541020.webp)
I A P 2 0 2 1 . 0 0 1 - A F M /
I R I S G 1 1 5 E / T U T O R T . 1
P a g e
|
20
FOR SIMULATION PURPOSES ONLY
SAFETY EQUIPMENT
Emergency Locator Transmitter
The Artex ELT is a completely self-contained and self-powered unit mounted
on the port side of the equipment compartment behind the baggage area,
with a cockpit remote switch located on the right instrument panel.
The ELT, when activated, will transmit on 121.5MHz 3 times per second until
the battery is depleted which at normal temperatures would be after at least
50 hours.
Simultaneously, for the first 24 hours of operation, it will transmit on 406.028
MHz once every 50 seconds; this transmission lasts for 440 ms and contains
pre-programmed identification data.
Cockpit Fire Extinguisher
A hand-held Halon fire extinguisher is secured to the floor behind the port
seat. A safety pin prevents inadvertent operation and the mounting allows
removal with one hand.
The unit is discharged by squeezing the trigger on the operating head. It is
primarily intended for use after a crash landing, however, if it is used in flight,
due to the noxious nature of Halon, the cockpit should be ventilated
immediately after operating the extinguisher and medical advice sought on
landing.
Escape Hammer
A combined escape hammer and harness cutter is located on the left side of
the centre console. If the canopy cannot be opened it can be smashed by
using the carbide tip. The reverse end of the hammer incorporates the
harness cutter that can be utilised if the harness cannot be released.
Emergency First-aid Kit
An Emergency First-aid Kit is secured to the port side of the baggage
compartment floor.
Central Warning Panel
A central warning panel (CWP) is located above the main instrument panel.
The CWP has captions as per the table below, a TEST button that illuminates
all the captions when pressed, and a DAY/NIGHT switch that reduces the light
output of the panel when required.