Iridex PASCAL Synthesis Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 141

Iridex PASCAL Synthesis Скачать руководство пользователя страница 3

PASCAL

®

Synthesis Ophthalmic Scanning Laser Systems

Page 3 of 141

88292-EN, Rev D

This manual is copyrighted with all rights reserved. Under the copyright laws, this manual
may not be copied in whole or in part or reproduced in any other media without the
express written permission of Iridex Corporation. Permitted copies must carry the same
proprietary and copyright notices as were affixed to the original under the law. Copying
includes translation into another language.

Please note that while every effort has been made to ensure that the data given in this
document is accurate, the information, figures, illustrations, tables, specifications and
schematics contained herein are subject to change without notice.

Iridex Corporation

®

, the Iridex Corporation Logo™ and PASCAL

®

are trademarks or

registered trademarks of Iridex Corporation.

PASCAL Synthesis; PASCAL Synthesis Ophthalmic Scanning Laser System are
trademarks of Iridex Corporation.

PASCAL Synthesis refers to a family of laser products: single wavelength 532 nm and
single wavelength 577 nm.

«
1
2
3
4
5
...
»

Содержание PASCAL Synthesis














































































































































Отзывы:

Нет отзывов