Iridex PASCAL Synthesis Скачать руководство пользователя страница 119

Страница: 119 / 141

PASCAL

Synthesis Ophthalmic Scanning Laser Systems

Page 119 of 141

88292-EN, Rev D

Code

Message

Critical

Clearable

Warning

Description

Action

206

SLA Detached

The SLA is not attached

Verify connection to
slit lamp.

207

Pattern Locked

The pattern cannot be modified at
this time. Certain patterns can only
be modified in Standby mode.

Press Ready button on
Touchscreen to return
to Standby mode before
modifying patterns.

208

System Busy

The user cannot start a treatment
because the system has a pending
message.

User to select End
Treatment and Return to
the Home Screen.
Re-access treatment screen
and reconfigure treatment
parameters.
If error repeats- End
Treatment and call Service

209

Footswitch in
Standby

The user pressed the footswitch in
standby mode.

Press Standby button on
Touchscreen to enter
Ready mode.

210

No output available

The user cannot become Ready
because the SLA is detached and
all external ports are empty.

Check SLA
connection. Reboot.
Call service if error persists.

211

Must use LIO

The user cannot deselect the
currently selected LIO because the
SLA is not attached.

Check LIO or SLA
connection.
Reboot.
Call service if error persists.

212

Attachment CRC
Error

The 1-wire data on an attachment
(LIO or SLA) has an invalid CRC
value.

Check LIO or SLA
connection.
Reboot.
Call service if error persists.

213

Laser Color
Mismatch

The 1-wire data on an attachment
(LIO or SLA) says that the device
does not support the system laser’s
color

Check LIO or SLA
connection.
Reboot.
Call service if error persists.

214

Bad Attachment
Version

The 1-wire data on an attachment
(LIO or SLA) has an unsupported
format version.

Check LIO or SLA
connection.
Reboot.
Call service if error persists.

215

Cannot Load
Favorite: Not Single
Spot

The system cannot load the
selected favorite because the SLA
is not attached, and the favorite is
not for the single-spot pattern.

Select a different favorite
or set parameters using the
Touchscreen.

216

Cannot Load
Favorite: No Output

The system cannot load the favorite
because no attachments (LIO or
SLA) are attached.

Select a different favorite
or set parameters using the
Touchscreen or attach an
LIO or SLA.

217

Cannot Load
Favorite: No LIO

The system cannot load the favorite
because it requires an LIO but no
LIO is attached

Select a different favorite
or set parameters using the
Touchscreen or attach an
LIO.

218

Cannot Load
Favorite: Bad
Pattern

The system cannot load the favorite
because it refers to a pattern that is
not in the system.

Select a different favorite
or set parameters using the
Touchscreen.

219

Database Error

The system cannot function
because a database operation
returned an error code.

Reboot.
Call service if error persists.

220

Laser Warmup
Timeout

The back-end could not warm the
lasers up quickly enough.

Reboot.
Call service if error persists.

221

3D Controller Error

The 3D controller is disconnected
or there was an error attempting to

Unplug and plug in the 3D
controller USB connector

Содержание PASCAL Synthesis














































































































































Результаты поиска

Содержание PASCAL Synthesis

Отзывы:

Iridex PASCAL Synthesis, Руководство оператора, Страница: 119 / 141

Результаты поиска

Содержание PASCAL Synthesis

Отзывы: