Iridex IQ 532, Руководство оператора

Страница: 26 / 49

22 IRIDEX IQ 577
®
/IQ 532
®
Laser Systems Operator Manual 15510-EN Rev G
K
EyBOard
m
OdE
A Select: letters or numbers
B Displays Preset name.
C Deletes characters in Preset Name field.
D Switch between uppercase and lowercase.
E Save changes.
F Cancel changes and return to Presets screen.
NOTE: When programming a Preset name, use only letters (upper and lower case) and numbers
(0 to 9). Do NOT use any symbols. Symbols may generate a warning message, "Aux Device
Required" when a TxCell Scanning Laser Delivery System is subsequently connected to the
laser console. If this error occurs, laser delivery with the TxCell Scanning Slit Lamp Adapter
will be disabled. To correct this:
1. Delete symbols that were entered into the Preset Name
2. Turn off the laser console
3. Allow the unit to power down, approximately 15 seconds
4. Turn on the laser console
5. If the problem persists, contact your local IRIDEX Technical Support representative.
A
C
D
B
E F