Iridex IQ 532, Руководство оператора

Страница: 44 / 49

40 IRIDEX IQ 577
®
/IQ 532
®
Laser Systems Operator Manual 15510-EN Rev G
7
Wireless Footswitch and EMC
Setting Up the Wireless Footswitch
The wireless footswitch comprises:
• Battery-powered footswitch (with or without power adjust)
• Laser console-powered receiver
Connect the wireless receiver to the footswitch receptacle on the rear of the laser. Three pedals
(as applicable) on the footswitch control the following:
• Left pedal = decrease power (hold down to ramp the parameter)
• Center pedal = activate laser
• Right pedal = increase power (hold down to ramp the parameter)
CAUTION: Each footswitch/receiver pair is uniquely linked and will not work with other IRIDEX
footswitches or similar components. Clearly identify each pair to prevent separation of
the linked components.
NOTE: The footswitch is designed to operate within 15 feet (5 meters) of the laser.
Testing the Batteries
NOTE: When batteries need to be replaced, contact your sales representative or IRIDEX Customer
Service. The wireless footswitch was designed with a battery life expectancy of 3 – 5 years of
normal operation and use.
LEDs on the footswitch assist in troubleshooting and indicate battery conditions as follows:
Footswitch LED Display Status
Green flash following pedal depression Footswitch OK
Batteries OK
Amber flash following pedal depression Footswitch OK
Batteries low
Blinking red LED for 10 seconds following pedal depression No RF communication