Iridex IQ 532, Руководство оператора

Страница: 39 / 49

15510-EN Rev G Safety and Compliance 35
Labels
NOTE: The actual label may vary with laser model.
Serial Number
(rear panel)
Ground
(bottom of laser)
Footswitch
Responsibility for Validation and Fitness-of-Use:
Because Valmark Industries, Inc. has no controlover the use or application of
these parts, it is the sole responsibility of the OEM customer and/or its designated
manufacturer to test all custom parts for fitness-of-use and validation of design
prior to acceptance of production units. Valmark Industries provides expertise in
the layout and consistent fabrication of high quality, reliable membrane switch,
custom graphics and labeling products. Valmark and its employees do NOT
purport to be experts in the end-use application of our customers, or the
environments in which these products will be stored and/or used.
THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24
HOURS IN ORDER FOR THIS JOB TO PROCEED WITH
PRODUCTION. ACCEPTANCE OF THE BELOW ART SAMPLE
RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE
PRODUCTION RUN. (1) Valmark may, at its discretion unless
otherwise noted, substitute any materials or BOM components
with equivalent or similar materials and/or components based on
control of cost or availability
APPROVAL PRINT
RESUBMIT WITH
CORRECTIONS
APPROVED WITH
CORRECTIONS
OK AS IS
APPROVAL
SIGNATURE DATE
APPROVAL PRINT
Customer Supplied Prints
Part Number Date
Dimensional
Graphics
Modifications
Description ECO # Rev. Date
NOTES: CONSTRUCTION:
1
LABEL PERIPHERY (keyline does not print)
2
BACKGROUND: BLACK
3
GRAPHICS: Blue PMS 285C
4
GRAPHICS: WHITE
31602
LABEL P/N: 31792-2F
0086
110001R
LABEL P/N: 31792-1F
0086
1212 Terra Bella Avenue
Mountain View, CA 94043 USA
Tel: 650-940-4700
Fax: 650-940-4710
www.iridex.com
MADE IN THE USA
REF
SN
31602
110001F
FCC ID: UDB31539
IC ID: 6590A-31539
Emergo Europe
Molenstraat 15
2513 BH The Hague
The Netherlands
Tel:(31) (0) 70 345-8570
Fax: (31) (0) 70 346-7299
EC REP
®
3
CENTER GRAPHICS
PART NUMBER:
GRAPHIC OVERLAY
DW
01/03/17
31792
F
IRIDEX
REV:
CUSTOMER:
DATE:
DATE:
1 OF 1
1:1
TOLERANCE:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION
SHEET:
SCALE:
TITLE:
APP BY:
DR BY:
Fax (925) 960-0900
Phone (925) 960-9900
www.nidec-vis.com
7900 National Dr. Livermore, CA 94550
.XX ±0.01” .XXX ±0.010”
DECIMALS TOOLING: ANGLES
±0.5º
.XX ±0.02” .XXX ±0.015” ±0.5º
DECIMALS GRAPHICS: ANGLES
3M 468
.010 8B35
BASE MATERIAL
ADHESIVE
Wireless Receiver
Responsibility for Validation and Fitness-of-Use:
Because Valmark Industries, Inc. has no controlover the use or application of
these parts, it is the sole responsibility of the OEM customer and/or its designated
manufacturer to test all custom parts for fitness-of-use and validation of design
prior to acceptance of production units. Valmark Industries provides expertise in
the layout and consistent fabrication of high quality, reliable membrane switch,
custom graphics and labeling products. Valmark and its employees do NOT
purport to be experts in the end-use application of our customers, or the
environments in which these products will be stored and/or used.
THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24
HOURS IN ORDER FOR THIS JOB TO PROCEED WITH
PRODUCTION. ACCEPTANCE OF THE BELOW ART SAMPLE
RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE
PRODUCTION RUN. (1) Valmark may, at its discretion unless
otherwise noted, substitute any materials or BOM components
with equivalent or similar materials and/or components based on
control of cost or availability
APPROVAL PRINT
RESUBMIT WITH
CORRECTIONS
APPROVED WITH
CORRECTIONS
OK AS IS
APPROVAL
SIGNATURE
DATE
APPROVAL PRINT
Customer Supplied Prints
Part Number
Date
Dimensional
Graphics
Modifications
Description ECO # Rev. Date
NOTES: CONSTRUCTION:
1
LABEL PERIPHERY (keyline does not print)
2
BACKGROUND: BLACK
3
GRAPHICS: Blue PMS 285C
4 GRAPHICS: WHITE
31602
LABEL P/N: 31792-2F
0086
110001R
LABEL P/N: 31792-1F
0086
1212 Terra Bella Avenue
Mountain View, CA 94043 USA
Tel: 650-940-4700
Fax: 650-940-4710
www.iridex.com
MADE IN THE USA
REF
SN
31602
110001F
FCC ID: UDB31539
IC ID: 6590A-31539
Emergo Europe
Molenstraat 15
2513 BH The Hague
The Netherlands
Tel:(31) (0) 70 345-8570
Fax: (31) (0) 70 346-7299
EC REP
®
3
CENTER GRAPHICS
PART NUMBER:
GRAPHIC OVERLAY
DW
01/03/17
31792
F
IRIDEX
REV:
CUSTOMER:
DATE:
DATE:
1 OF 1
1:1
TOLERANCE:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION
SHEET:
SCALE:
TITLE:
APP BY:
DR BY:
Fax (925) 960-0900
Phone (925) 960-9900
www.nidec-vis.com
7900 National Dr. Livermore, CA 94550
.XX ±0.01” .XXX ±0.010”
DECIMALS TOOLING: ANGLES
±0.5º
.XX ±0.02” .XXX ±0.015” ±0.5º
DECIMALS GRAPHICS: ANGLES
3M 468
.010 8B35
BASE MATERIAL
ADHESIVE
Remote Control
1
2
3
4
PMS 285C BLUE LOGO
GRAPHICS: WHITE
BACKGROUND: BLACK
LABEL PERIPHERY - DOES NOT PRINT
LAMINATION:
.005 LEXAN C
65891
IPX1
65891C
RC0100
65777
IQ Family Remote Control
Responsibility for Validation and Fitness-of-Use:
Because Valmark Industries, Inc. has no controlover the use or application of
these parts, it is the sole responsibility of the OEM customer and/or its designated
manufacturer to test all custom parts for fitness-of-use and validation of design
prior to acceptance of production units. Valmark Industries provides expertise in
the layout and consistent fabrication of high quality, reliable membrane switch,
custom graphics and labeling products. Valmark and its employees do NOT
purport to be experts in the end-use application of our customers, or the
environments in which these products will be stored and/or used. THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24
HOURS IN ORDER FOR THIS JOB TO PROCEED WITH
PRODUCTION. ACCEPTANCE OF THE BELOW ART SAMPLE
RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE
PRODUCTION RUN. (1) Valmark may, at its discretion unless
otherwise noted, substitute any materials or BOM components
with equivalent or similar materials and/or components based on
control of cost or availability
APPROVAL PRINT
RESUBMIT WITH
CORRECTIONS
APPROVED WITH
CORRECTIONS
OK AS IS
APPROVAL
SIGNATURE
DATE
IRIDEX
APPROVALS DATE
DRW
DW 08/08/14
COMPANY (OEM)
SCALE PART NO.
1 : 1
REV
MANUFACTURERS:
SHEET 1 of 1
CHK
DSN
ENGR
THIRD ANGLE
PROJECTION
UNLESS OTHERWISE SPECIFIED, UNITS
ARE IN INCHES. TOLERANCES:
INTERPRET DRAWING PER
ANSI Y14.5M - - 1994
DO NOT SCALE DRAWING
Customer Supplied Prints
Part Number
Date
Dimensional
Graphics
Modifications
Description ECO # Rev. Date
NOTES: CONSTRUCTION:
BASE MATERIAL
ADHESIVE - FULL
PERM
.XX ±0.01”
.XXX ±0.010”
TOOLING:
ANGLES
±0.5º
.XX ±0.02”
.XXX ±0.015”
CUT TO GRAPHICS:
ANGLES
±0.5º
Valmark Interface Solutions
A Nidec Kinetek Company
®
3M 7871 0.002 Gloss White
TT PET #350 LSE