IQaudIO Case parts / Assembly
Each case is supplied cut out and includes:
- 4x Long bolts
- 4x Large nuts
- 4x 5mm male / female PCB spacers
- 1x Top Plate
- 1x Bottom Plate
- Several sides (There are normally 3 sides which are used for all IQaudIO boards and a set of sides
specific to the IQaudIO board being used.)
A. Lay out the CASE+ sides corresponding to the Raspberry Pi & the specific IQaudIO board
B. Then, build the sides up around the Raspberry Pi. Use sticky tape at each corner to make things
simpler to assemble.
v32
24-Nov-2019
19
