Warning:
To reduce the risk of injury or death, please read the following:
1. Read, follow and understand all instructions
2. The automated gate is not for pedestrian use
3. Do not activate your gate operator unless it is in sight and you can
determine that it will travel without interfering with any objects or persons.
Always keep people and objects away from the gate and its area of travel
4. Keep all access devices such as key switches, push buttons, and
telephone entry systems away from the gate. The recommended distance
is a minimum of 10 feet.
5. Make sure that all warning signs have been attached and that the
operator has been installed correctly
6. If edges and photoelectric sensors have been installed, they should be
tested for proper operation.
7. Keep gates properly maintained. Grease and lubricate all hinges and
brackets to prevent binding and unnecessary friction.
8. Have the operator tested and serviced by a qualified and experienced
technician. The gate should respond and reverse to all obstructions both
inherently and externally
9. Disconnect the operator only when it is not in motion
10.
DO NOT
turn on the automatic close timer unless the gate is equipped
with at least one non-contact external obstruction sensor, e.g., a photo
electric beam, a vehicle loop, etc.
3
