Ytterbium Fiber Laser, Model YLR-200-AC
IPG Laser GmbH, 2009
Proprietary Information. All rights reserved
Rev. Date 08-12-2009
6
In order to ensure the safe operation and optimal performance of the product, please follow
these warning and caution notes in addition to other information contained elsewhere in this
document.
WARNING:
Make sure the instrument is properly grounded through a protective
conductor of the AC power cable. Any interruption of the protective ground
conductor from the earth terminal can result in personal injury.
CAUTION
:
Before supplying the power to the instrument make sure that a correct
mains voltage of the AC power source is used. Failure to use the correct
voltage could cause damage to the instrument.
WARNING:
No operator serviceable parts inside. Refer all servicing to qualified IPG
personnel. To prevent electrical shock, do not remove covers. Any
tampering with the product will void the warranty.
WARNING:
For continued protection against fire hazard, replace the line fuses only
with the same types and ratings. The use of other fuses or materials is
prohibited.
WARNING:
If this instrument is used in a manner not specified in this document, the
protection provided by the instrument may be impaired. This product must
be used only in normal conditions.
CAUTION:
For the operation conditions for processing highly reflective materials
such as copper and its alloys you should consult with IPG.
IMPORTANT:
YLR-200-AC laser is an air cooled model. Please, provide appropriate
conditions for passage of cooling airflow.
If the back reflection is expected, please, provide optical output termination
(collimator or fiber connector) with sufficient cooling.
