page 8
manual pressure sensor
ipf electronic gmbh
Kalver Str. 25 - 27
58515 Lüdenscheid - Germany
www.ipf-electronic.com
Subject to alteration!
Tel +49 2351 9365-0
Fax +49 2351 9365-19
menu analog ( active only if in OU 2 an analog signal is set)
operation modes of the switching outputs
notes:
•
The following examples and descriptions of the switching output 1 (SP1) refer to the
switching function „normally open“ (no). If the switching output 1 is set „normally
closed“ (nc) the states are reversed.
•
The minimum range between the switching outputs (SP.1 and rSP.1) is 1% of the
nominal pressure; stated by the system.
•
The smallest adjustable hysteresis is 1% of the nominal pressure; stated by the sys-
tem.
•
All examples are effective for output 2, if this output is defined as switching output
(SP-2) also.
Ou2= analog output
analog start value
analog end value
damping of the analog output
error–signal for analog output
(in 4 ... 20mA / 20 ... 4mA only)
error–display for analog output
(in 4 ... 20mA / 20 ... 4mA only)
