emu3/emu3ACO Operation Guide 33
Version 2.1
Telnet commands
clear overcurrent command
This command clears the trip state if the unit has previously tripped due to the current trip level being exceeded for
more than 30 seconds.
Following the trip clear, all outputs will remain switched off.
Syntax:
clear overcurrent unit_number
Parameters:
Parameter
Value/Options
Description
Example result
unit_number
uYY
Command affects unit number YY
Resetting overcurrent trip on uYY
Example commands:
clear overcurrent u1
Error messages:
Message
Description
Invalid command or exceed max command length
Incorrect command syntax
Not Supported
Unit Number out of range