18
emu3/emu3ACO Operation Guide
Version 2.1
Setting the power up sequence
Setting the power up sequence
Note:
This functionality is only availabe to accounts assigned the
Administrator
role (see “Authentication: Managing
users” on page 20).
You can control the order in which devices attached to a particular emu3 unit power up (this can be when you
initially switch on your emu3 system, or after a power failure). This avoids a power surge caused by multiple devices
starting up simultaneously.
To modify the power-up sequence:
1.
Log into the IPE Dashboard as a user with Administrator privileges (the default
admin
user has this
automatically).
2.
In the IPE Dashboard, display the Device Details page for the emu3 unit you want to configure.
3.
Expand the
Power Up Sequence
panel.
4.
For each power outlet, choose an option from the
DELAY OR ACTION
drop-down menu.
–
Previous State
: The power outlet remains in the same state as it was before power was restored to the emu3
unit
–
Off
: The power outlet is switched off on power-up, irrespective of whether it was previously on or off
–
On Immediately
: The power outlet is switched on as soon as power is restored to the emu3 unit.
–
On after (n)s
: The power outlet is switched on n seconds after power is restored to the emu3 unit.
5.
Click
OK
