IOtech eZ-Analyst Скачать руководство пользователя страница 107

Страница: 107 / 131

eZ-Analyst

988191

Interactive Plot Display 6-9

Selecting and Arranging XLS Files for Overlay Order

4. Select and open the desired XLS files. Then arrange them in the preferred ranking

order. The following notes apply.

Counting the original, up to 16 traces can be displayed; i.e. the original plus

up to 15 overlays.

If an XLS file is compatible, it will overlay onto the display.

If an XLS is of the wrong type, wrong channel number, or would cause you to

exceed the limit of 16 displays, a message box will inform you of the situation.

Traces can be moved up or down in ranking order in the “Selected XLS files

list.” This is accomplished with the <Move Up> and <Move Down> buttons.
See preceding figure.

XLS files can be added to or deleted from the “Selected XLS files list” list via

the associated buttons.

The <Reset List> button clears the list of XLS files and allows you to create a

new list.

5. After you have completed your selection and have positioned the XLS filed in the

desired order, click the <Ok> button.

Содержание eZ-Analyst




































































































































Результаты поиска

Содержание eZ-Analyst

Отзывы:

Бренды по названию

Популярные бренды

IOtech eZ-Analyst, Руководство пользователя

Результаты поиска

Содержание eZ-Analyst

Отзывы:

Бренды по названию

Популярные бренды