inXtron Hydra Super-S LCM, Руководство пользователя

Страница: 3 / 16

Hydra Super-S LCM Introduction
1.5 Detailed View
1.5.1 Front View
When only 2 or 3 hard
drives are installed, the
red LED indication for the
missing hard drives can
be safely ignored.
Changing the RAID mode
requires you to re-format
the drives. This will erase
all data on the hard drives
that are being formatted.
Make sure to backup all
existing data first!
LED/Button Status

Blue = Power on

Flashing green = Accessing data

Flashing red = System starting up

Steady red = Error or drive is not installed

Flashing yellow = Rebuilding RAID array

Steady yellow = One or more faulty drive(s)

RAID mode can be changed via LCD display

RAID mode locked
Select

Select setup menu or mode
OK

Confirm current option or enter setup menu
Note
In order to prevent an accidental change of the RAID mode, it can be locked. When the RAID
mode is locked, it is not possible to change or access the RAID settings via LCD display. Instead,
the display will show a message saying “RAID Mode Locked”.
1.5.2 Rear View
Label Description
Security lock slot
ON/OFF Power switch
AC: 100~240V Power receptacle
eSATA External SATA port
FW400 FireWire 400 (1394a) port
FW800 FireWire 800 (1394b) port
USB 2.0 USB 2.0 High Speed port
Page 2