inXtron Hydra Super-S LCM, Руководство пользователя

Страница: 13 / 16

Hydra Super-S LCM LCD Display
3.4.5 Fan Speed Setup
The smart-fan can automatically regulate the fan speed according to the internal case temperature,
it can be set at a certain speed or it can be deactivated.

[Automatic] Regulates the fan speed according to the HDD temperature (below 45˚C = low
speed, 45-60˚C = speed increases in 5 steps, above 61˚C = high speed).

[HighSpeed] Fan speed is set to high speed.

[LowSpeed] Fan speed is set to low speed.

[OFF] The fan is turned off. This setting should only be used if the device is located in a cool
and temperature controlled room.
Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the
different options.

To exit the menu without changing any of the settings, press the [Select] button until you see
the Exit screen and then press the [OK] button.

To change the setting, press the [Select] button to choose your preferred mode and then press
the [OK] button to confirm the change.
Page 12