background image

iv

Music on hold activation:

activation in Positions 2 or 3 via Flash then Hold

To activate:  press               then

To deactivate just  re-select  that line and press

Voice Deactivation:

 if the call has been on Hold at least a few seconds, it can

also be deactivated by just 

speaking

 over the Audio for example say :  “Hi I am

Back” .

If for some reason you are not able to voice -deactivate, try speaking a little
louder and more direct into the microphone. Remember you can always use the
Flash button to deactivate the audio as well.

Want to use just one button ?   

Press                 to activate MOH and when

ready to go back to caller just speak over the audio!.  Or press Flash again.
Note: this does not hold the line so the other party may still hear you, set the
volume louder to mask it.

In position 

2

 the device works only via Flash then Hold, in position 

the device

works via Flash then Hold or just Hold (if

 

you have a compatible phone). This

mode of operation is useful when you have mix of  phones that some are
compatible with Hold only activation and some activate via Flash then Hold.

Note that since Flash button is used in this case to activate the audio you need
to use Flash -Flash for things like:  

Call waiting , 3 way calling, Centrex Call

Transfer

Example   ( for positions 2 or 3

 ) 

 to answer a call waiting call press

Example  (position 2/ 3 )  

to make a 3 way or conference call press  

you will get a dial-tone now dial the desired phone number & press 
to join the two calls together.

NOTE:

 If you have 

“Call Waiting”

 service, only one call may be placed on

Music-On-Hold, the other call is held in the phone company central office in
silence not in your office.

Warranty

This product is warranted against defects for a period of Five  (5) year from the date of original
invoice. We will repair/replace the Product with no charge for parts or labor within this time. To
obtain warranty service the Product needs to be returned fright prepaid by the customer with a
copy of original invoice.  This warranty does not apply if in the sole opinion of Innovative
Telecommunication Technology LLC, the product has been tampered with or damaged by
lightning or any other acts of nature, misuse, neglect or unauthorized service.

EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER
WARRANTIES, EXPRESSED OR OTHERWISE,INCLUDING, BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OR MERCHANTIBILITES OR FITNESS FOR A SPECIAL PURPOSE.
IN NO EVENT SHALL INNOVATIVE TELECOMMUNICATION TECHNOLOGY LLC BE LIABLE
FOR LOSS OF PROFITS OR BENEFITS, INDIRECT, SPECIAL, CONSEQUENTIAL OR
OTHERWISE ARRISING FROM ANY BREACH OF THIS WARRANTY OR OTHERWISE.

P13

Hang up and set the switch to middle or right most position

FLASH

HOLD

FLASH

FLASH

FLASH

FLASH

FLASH

FLASH

FLASH

FLASH

Tip: If you have audio flicker problem , Reduce  the  Volume

P4

    1  2  3

Package Content:

SX8600 Digital Player/Recorder/adapter unit
Power adapter 110v AC to 12v AC 600 ma
3.5mm male to 3.5mm male audio cord 6’
2  Rj-14 phone cords
User’s Manual
MX9008 or MX9017 Flash Card
Microphone/Headset

Содержание SX8600









Отзывы: