v
Specifications:
File Formats
supports any sound file format such as Windows .wav, MP3,
WMA, etc.
Frequency response
20Hz to 20 KHz.
Sampling rate
8-bit/16-bit uncompressed PCM @ 8, 11, 12, 16, 22, 24, 32, 44
& 48 KHz
Distortion
less than 0.1% THD
Audio Quality
supports better than CD Quality at 188 KB/s
Special effects:
supports Windows Media Files and SRS WOW Effects
Memory Capacity
1 to 34 minutes (17 minutes @ full 188 KB/s sample rate).
Memory Type
Multi-level Flash, 100 years retention time at no power, 100K re-
recordable
Playback
auto-repeat
Message loading
load,
automatic
via playing the email; CD load
automatic
Power supply
110VAC 60 Hz. To 12VAC 600ma
Audio output
1000 mili watts, Mono RCA , 2V p-p @ 8
Ω
4V p-p @ 600
Ω
, 8V p-p
@1200
Ω
Size
5.5” x 4” x 1.5” (L x W x H)
Color
Metallic Blue
Weight
1.50 pounds (2.00 pounds with power supply)
Auto Attendant operations:
refer to page 1 for connections
make sure switch is in
A
or
C
(not B)
To hear the current greetings:
To hear the current Transfer message:
To Record a new Greeting via Microphone:
(not available in model SX8600E)
To Record a new Transfer message via microphone:
(not available in SX8600E)
P5
•
set the bank switch to bank 1 for day greeting or bank 2 for night greeting
•
remove
the Microphone (usually RED color connector) from MIC IN jack
•
remove
the recording cord from the Audio IN jack
•
connect
the head set to Audio Out Jack (RCA) or make a call and place yourself on
Hold, adjust the volume level if needed so you can hear the on hold stuff.
•
Press and hold the REC button for about 5 seconds till the Green status light turns
OFF, now release the REC button and you will hear the current greeting.
•
set the bank switch to bank 2, remove/make the connections as above.
•
Press and hold the REC button for about 5 seconds till the Green status light turns
OFF, Hold it pressed 5 more seconds till the Green turns back ON, now release the
REC button and you will hear the current transfer message.
•
set the bank switch to bank 1 for day greeting or bank 2 for night greeting
•
connect
the Microphone to MIC IN jack (usually RED color connector)
you may optionally connect the recording cord to Audio IN jack (if you want to
record a back ground music)
•
connec
t the head set to Audio Out Jack (RCA) or make a call and place yourself on
Hold, adjust the volume level if needed so you can hear the on hold stuff
•
Press and hold the REC button for about 5 seconds till the Green status light turns
OFF, now release the REC button and you will hear the current greeting.
•
Press the REC button to start recording your new greeting and begin speaking into
the microphone (you have up to 30 seconds), press REC again when you are
finished, it will play it back again for you, you may Press REC again during the
playback if you need to re-record, when you are done let it play the final recording
for you and do not press REC and it will automatically exit to normal ON hold
playback.
•
set the bank switch to bank 2, make the connections as above.
•
Press and hold the REC button for about 5 seconds till the Green light turns OFF,
Hold it pressed 5 more seconds, the Green turns ON, now release the REC and you
will hear the current transfer message.
•
Press the REC button to start recording your new transfer message and begin
speaking into the microphone (you have up to 4 seconds), press REC again when
you are finished, it will play it back again for you, you may Press REC again during
the playback if you need to re-record, when you are done let it play the final
recording for you and do not press REC and it will automatically exit to normal ON
hold playback.
P12
