background image

iii

Notes: Day/Night mode, Auto attendant and Greetings:

Bank1 / Bank2

Bank1 contains the “Holiday Format” and Bank2 contains the “Normal Format” hold
music 

(normally switch is in Bank 2 unless you record your flash card differently).

Use the bank switch any time to select between these two productions.

Day Mode / Night Mode: 

In

 

switch positions A or B in which the device answers the

lines, set to “Day Mode” during day and “Night Mode” during the night as follows:

1)  Select any available line ( L1, L2,  L3 or L4 ) to get a dial tone
2)  Press FLASH   you will get dial tone
3)  Press FLASH   you will get dial tone again

4)  Press    

#

        you will get a prompt  “device is set to Day mode”  or Night Mode”

5)  Hang up

Day Greeting: 

This message is heard  when the device answers the lines

in “Day Mode”  it can be up to 30 seconds.

 

     

Night Greeting: 

This message is heard  when the device answers the lines

in “Night Mode”  it can be up to 30 seconds.

Transfer Message: 

This message is heard just before the line is going  to

ring again

like “please hold while we transfer your call”  it  can be up to 4 seconds.

All greetings, messages and the Hold Music are stored on the same Flash card

Examples of typical office use:

If you do not want any greeting stuff just set the switch to 

and use the device just

for Music-on-hold function. The other switch is in Bank2 for “Normal Format”

Example of a night greeting:
 ...our office is now closed... our normal office hours are...please stay on the line to
leave a message... ; set your answering machine or voice mail service to answer at
2

nd

 or 3

rd

 ring or more so when the device rings the lines again it can take the

message.

Example of a day greeting:  “...Thank you for calling XYZ......please hold for a
representative...”
during the day to temporarily disable the auto attendant, flip the switch to 

C

Music on hold activation:

activation in Positions 1 or 3 via just Hold

Start with position 

1

, make or receive a real call, the LED on the SX8600 turns ON

solid, then simply press the               button on your telephone, the Music will be
heard to the caller and the LED on the SX8600 will start to BLINK 

,

 to return to the

call  just  re-select that line. 

(Be sure to allow 1 or 2 seconds before putting a call  on

HOLD).   

If it did not work 

hang up

 and then try it again 2 or 3 times.

Position 3

: if  after a few tries it is not working hang up and change the switch to

position 3 and try it a few times.

Deactivating hold music

 

manually  

If for any reason the hold music is activated inadvertently,

it can be deactivated by pressing the                button

The following are examples of phones that work in position 

2

 or 

3

  via Flash then Hold:

American Venture, ATT 962, ATT 972, Casio any model , Airway 2 line, Airway 4 line,
Panasonic KX-TG 2000B, KX-TG4000B

,

 KXTG2000, KX-TG2720, KX-TG2730, KX-TG2740,

KXTG4000, KX-TGA200, KXTGA400, KX-TGA420, SBC 410,

List of corded regular phones compatible via Hold Button activation:

Please note: This is a partial list,  there are other factors relevant to activation via Hold button in
these settings-see-the trouble shooting section or special setting, If your phone is not on this list
try it any way or use the setting 

2

 or 

3

 that works on all phones via Flash then hold.

AT&T:

 21070, 262, 272, 412, 422, 4952, 612, 622, 712, 722, 732, 742, 752, 812, 822, 830,

832, 842, 843, 853, 854, 874, 902, 912,922, 944, 945, 952, 953, 954, 955, 964, 974*,984*,
982, 992, SIGNATURE, FT483  (* rev prior to 11/2006)

Brother Quatro

: 412

Bell

:

 

223, 232, 259, 261,

 

268, 367, 470, 52905, Sonecor 412, 412CID, 4900, BE5200,

BE5300, Techline 420

GE:

 187, 2-9315-A, 2-9318, 2-9435-A -B -C, 2-9436-A, 2-9438-A,  2-9450-A -B -C -D -E  -

F, 2-9439-A to -EGL,  2-9451A, 2-9481, 2-9487GE2-A, 2-9488, 2-9638-A, 2-9975, 2-
9488GE2-A

 

IBM:

 412, 412CID, 4900

Northern Telecom:

 Unity

Phonemate

: PMG-4600

Panasonic:

 KX-T3110  3120 3122 3135 3145 3155 3160 3165 3170 3175 3280 3980-H

3980-R7 3981, KX-TC930, KX-TS20, KX-TS21, KX-TS25, KX-TS27, KX-TS208, VA-8400

Radio Shack: 

 206, 208, 209, 210, 212, 411, 412, 612, 43-373D, 43-430, 43-642, ET-180,

43-470, ET-184, ET-192, ET-193, 43-622, 43-469

 , 1710, 1753

RCA

 25403 RCA, 25413, 414,415 RCA-2, all models including cordless portion.

Sony:

  IT-M804

SBC: 

2105, 4000

Southwestern Bell:

 FT325, FT360, FT365BL FT383, FT412, FT483, FT484

Sprint/Radio Shack

:

 SP-702 / 43-5702, SP-705

TT Systems:

 4012, 412, 412CID, 4900, 4300, 5100, 5200, 5300, 7993

Vtech:

 4121

1  2  3

FLASH

HOLD

P3

P14

BANK

2

Содержание SX8600









Отзывы: