Optidrive VTC – User Guide
12
www.invertek.co.uk
5.
Operation
5.1.
Managing the keypad
The drive is configured and its operation monitored via the keypad and display.
NAVIGATE
Used to display real-time information, to access and exit
parameter edit mode and to store parameter changes
UP
Used to increase speed in real-time mode or to increase
parameter values in parameter edit mode
DOWN
Used to decrease speed in real-time mode or to decrease
parameter values in parameter edit mode
RESET /
STOP
Used to reset a tripped drive.
When in Keypad mode is used to Stop a running drive.
START
When in keypad mode, used to Start a stopped drive or to
reverse the direction of rotation if bi-directional keypad
mode is enabled
5.2.
Changing Parameters
Procedure
Display shows...
Power on Drive
Press and hold the
for >2 seconds
Press the
Key
The
and
can be used to select the desired parameter
etc...
Select the required parameter, e.g. P1-02
Press the
button
.
Use
the
and keys to adjust the value, e.g. set to 10
.
Press the
key
The parameter value is now adjusted and automatically stored. Press the
key for >2 seconds to return to
operating mode
