29
13
GS62 Air Extraction System •
Installation and Operating Instructions 09/2013
TROUBLESHOOTINGANDDISPOSAL
10 TROUBLESHOOTING AND DISPOSAL
10.1 Troubleshooting
The table contains an overview of potential faults, causes and rectification instructions. If the problem per-
sists, please contact your factory representative. Information on this is in the section Warranty and \Service.
10.1.1 GS62 air extraction system
Fault
Cause
Rectification
Fault
Cause
Rectification
Fault
Cause
Rectification
Fan failure
No electrical voltage
Switch thegrid voltage off
Fan failure
No electrical voltage
Switch thegrid voltage off
Fan failure
No electrical voltage
Switch thegrid voltage off
and back on.
and back on.
and back on.
Installation fault
Check the polarity of all cables to ensure they
Installation fault
Check the polarity of all cables to ensure they
Installation fault
Check the polarity of all cables to ensure they
are connected correctly. Check the switches/
are connected correctly. Check the switches/
are connected correctly. Check the switches/
buttons connected for proper function.
buttons connected for proper function.
buttons connected for proper function.
Fan motor defective.
Replace the fan, including housing.
Fan motor defective.
Replace the fan, including housing.
Fan motor defective.
Replace the fan, including housing.
Noise
Foreign body in the fan
Remove the foreign body from the
Foreign body in the fan
Remove the foreign body from the
Foreign body in the fan
Remove the foreign body from the
fan and clean the GS62 air extraction system.
fan and clean the GS62 air extraction system.
fan and clean the GS62 air extraction system.
Fan blades dirtied
Clean the fan blades with a brush.
Fan blades dirtied
Clean the fan blades with a brush.
Fan blades dirtied
Clean the fan blades with a brush.
10.1.2 Functional modules
Note
- An overview for R60 controller, delay timer and hygrostat module fault rectification is in
the additional, accompanying installation and operating instructions for the GS61.
10.2 Disposal
Dispose of the product in line with applicable national regulations. The products described in these installation
and operating instructions are broadly recyclable given
their ecologically compatible manufacturing processes. Please contact a waste management center for elec-
tronic equipment for environmentally sustainable recycling and disposal of your old system. Refer to the over-
view for disposal recommendations.
Product
Material
Disposal
Product
Material
Disposal
Product
Material
Disposal
Protective hood
High-grade steel
Collection point for electronic equipment
Protective hood
High-grade steel
Collection point for electronic equipment
Protective hood
High-grade steel
Collection point for electronic equipment
Fan
PBTP / PA
Fan
PBTP / PA
PSU
Iron / copper
Iron / copper
Telescopic tube / flat duct
PVC
Recycling
Telescopic tube / flat duct
PVC
Recycling
Telescopic tube / flat duct
PVC
Recycling
inside baffle
PVC / glass / metal
PVC / glass / metal
