18
GS62 Air Extraction System •
Installation and Operating Instructions 09/2013
INSTALLATION
INSTALLATION
Telescopic tube sealing tape
Wall bracket (x 2)
Window reveal
Wall holder fixing fixing screws (x 4)
Insulation
Exterior plaster
Telescopic tube
Masonry
Figure 11: Fitting of wall brackets
1. Use the fixing screws (4) to attach the two wall brackets (2) to the outer wall.
Flat duct
Wall bracket (x 2)
Grate
Sleeve
Figure 12: Fitting of sleeve and grate
2. Push the circular opening on the flat duct onto the telescopic tube and secure it at the wall brackets (2).
3. Push the sleeve (4) for attaching the grate onto the flat duct.
4. Push the grate (3) onto the sleeve until it audible clicks into place (additional securing with acrylic as
required).
5.10 Dimensional drawings
5.10.1 GS62 with protective hood
Wall opening
Protective hood (outline)
Exterior side element (e.g. window, door)
Shown in the drawing is the situation most
aesthetic visually - the top edge of the protective hood is flush with
the top edge of the structural element or with the lower edge of the
soffit on the lintel.
Figure 13: Wall opening dimensional drawing, GS62 telescopic tube with protective hood (exterior view)
Note
- Keep to the minimum distance of 250mm away from other components on the exterior.
1
1
1
1
1
2
2
2
2
2
4
4
4
4
5
5
6
6
7
8
7
8
3
3
3
3
≥ 250
Ø115
78
78
2
1
