86
CLEANING AND CARE
inVENTer Connect controller platform | Operating instructions
5.2 Connect inner cover
CAUTION
Cleaning by children and persons with limited abilities.
Injury to persons and/or incorrect functioning of the ventilation system!
• No cleaning or maintenance activities may be performed on the ventilation system by children
and/or persons who are not fully capable of safely doing so due to their physical, sensory or
mental capabilities, inexperience or lack of knowledge.
The housing and automatic closing flap of the inner cover are virtually maintenance-free.
Any servicing work required can be carried out by the user after brief instructions.
Clean or replace the dust filter (alternatively pollen or activated carbon filter) regularly. After care
or replacement, make sure that you have inserted the filter correctly to avoid malfunctions of the
ventilation unit.
Detergents
NOTICE
Due to the scratch-sensitive plastic surface of the inner cover,
damage may occur to the surface.
• To prevent damage to the surface, do not use sand, soda, acid or chlorine-based cleaning
agents.
A commercially available detergent in warm water can be used for cleaning. The following tools
may be used for cleaning:
• lint-free, soft cloth
• soft brush
• vacuum cleaner
Service recommendations
The servicing tasks and intervals listed here are recommended by inVENTer GmbH to maintain
the functionality and performance of your inner cover. Depending on requirements, your personal
schedule may deviate from these recommendations.
Interval
Module
Maintenance activity
Monthly
Housing
Clean the surfaces with a damp cloth.
Pollen filter (if available)
Replace the used filter.
Quarterly
Dust filter
Rinse the dust filter in warm water.
Or
Replace worn dust filters.
Half-yearly
Activated carbon filter
(if available)
Replace the used filter.
Table 7: Maintenance recommendation
