inVENTer Connect inner cover Скачать руководство пользователя страница 45

Страница: 45 / 104

OPERATION AND SET-UP ON THE CONTROLLER

inVENTer Connect controller platform | Operating instructions

Warnings / Errors

If the system reports an error, the warning triangle symbol appears on the controller's display

screen. Note the following restrictions:

•

An error code can only be displayed on the controller as long as the LED is flashing.

After the error code has been displayed once, it is deleted. At the same time, the LED stops

flashing. If the error has not been eliminated, but only the error code has been deleted, the

warning triangle symbol remains active (until the error has been eliminated). The error can then

only be read with the "inVENTer Mobile" app, no longer on the controller.

• Each error code is displayed only once, even if the error occurs in the system on more than one

component. Example: The system update has failed on four inner covers, but the controller only

displays F03 once, not four times

Requirements:

• The warning triangle symbol appears on the

controller display screen.

•

The LED on the controller flashes RED / WHITE

alternately.

►

Press the select key to display the error

code.



The error code is displayed on the display

screen.

►

Press the select key again to display

more error codes, if necessary.



Error code changes

Other errors have occurred in the system. To

display all errors, press the select key repeatedly

until the error code no longer changes.



Error code does not change

No other errors present in the system.

►

Press the mode key to confirm the error

display.



All error codes are deleted.

The flashing LED on the controller goes out.



The display screen shows the zone status.

If the error codes are cleared/acknowledged but

the error has not been corrected, the warning

triangle symbol continues to be displayed on the

start screen. It goes out after the error has been

corrected.

►

Eliminate the cause of the error

(e.g.



5: Cleaning,



7: Troubleshooting).



The warning triangle symbol goes out.

If more than one warning is reported

(LED on controller flashes alternately RED / WHITE)

Option 1: Display and acknowledge errors

Option 2: Clear error codes without displaying

►

Press the select key repeatedly

until all error codes have been

displayed and cleared.

►

Press the mode key.



All error codes are deleted. The

error codes are not displayed.



The flashing LED on the controller goes out. Eliminate the cause of the error.



PUSH

Содержание Connect inner cover









































































































Результаты поиска

Содержание Connect inner cover

Отзывы:

Похожие инструкции для Connect inner cover

Бренды по названию

Популярные бренды

inVENTer Connect inner cover, Руководство по эксплуатации

Результаты поиска

Содержание Connect inner cover

Отзывы:

Похожие инструкции для Connect inner cover

Бренды по названию

Популярные бренды