manualshive.com logo in svg

inVENTer Connect inner cover, Руководство по эксплуатации, Страница: 26 / 104

Поделиться
Скачать
inVENTer Connect inner cover Скачать руководство пользователя страница 26

26

OPERATION AND SET-UP ON THE CONTROLLER

inVENTer Connect controller platform | Operating instructions

Attaching closing flaps / swivelling the locking arm to the right

NOTICE: 

Locking arm in wrong position. Breakage of the locking arm.

Before

 the closing flap is refitted, the locking arm must be swivelled to the right. This is done 

exclusively by the controller. To do this, 

switch all devices to pause

  

(

 3.6: Boost/Pause or when operating via app 

 4.8: Set ventilation mode and level).

Never swivel the locking arm by hand!

Requirements:

•  The Connect inner covers (and any other  

components) are paired with the controller.

•  The "System Information" display screen is called 

up.

 

►

Press the Boost/Pause key (1) on the 

controller.

 

The first symbol flashes.

 

►

Press the Boost / Pause key on the  

controller again until the  

Pause symbol 

II

 

flashes.

 

►

Press the selection key on the controller 

to confirm the pause (2).

 

The locking arm swivels to the right.

Fit the closing flap.

 

►

Hook the lugs of the closing flap into the electronics 

cover at the bottom (

1

).

 

►

Press the spring clip at the top slightly downwards  

(

2

).

 

►

Guide the closing flap to the top of the electronics 

cover (

3

), pushing the spring clip, which is slightly 

pressed down, into the opening provided in the 

electronics cover.  

The spring clip engages and the closing flap is 

pulled and held by the installed magnets to the 

electronics cover.

 

►

Exit the pause function: 

Press the Boost / Pause button on the controller 

several times again until the     

 symbol flashes.

 

Confirm with the select key      .

 

You have refitted the closing flap.

1

2

3

PUSH

2 x

PUSH

Содержание Connect inner cover









































































































Отзывы:

Нет отзывов